Opened 14 years ago

Last modified 12 years ago

#344 assigned flight processing

GB08/19, 154b/2010, London night

Reported by: ella Owned by: knpa
Priority: alpha 5 Milestone: 2010 data processing completion
Component: Archiving Keywords:
Cc: Other processors:

Description (last modified by knpa)

Data location: users/rsg/airborne/workspace/GB08_19-2010_154b_London_night

Data arrived from ARSF via network transfer on 08/06/2010.

Scientific objectives:
Classify urban landcover with ARSF remote senseing, remotely determine surface topography and surface temperature, which is then to be combined with meteorological data to model the urban energy balance (UEB).

Priority: a5

PI: M. J. Wooster

Sensors

LiDAR (13/08/2010)
RCD (see comments)
Tabi

Change History (18)

comment:1 Changed 14 years ago by ella

Sensors
LiDAR
Eagle
Thermal

comment:2 Changed 14 years ago by benj

  • Description modified (diff)

comment:3 follow-up: Changed 14 years ago by ella

There is a gap in one of the flight lines.
Two basestations have been used and two sbets files generated (one for each basestation) because we could not minimise the combined seperation or get a green line for all flight lines.

comment:4 Changed 14 years ago by jb362

IPAS navigation processing complete.

comment:5 Changed 14 years ago by jb362

Applanix processing: 2 gaps in flight so we split it into 3 sections. The first 2 sections are fine but the last failed to produce an sbet file. Everything is in workspace though, including the semi-completed third section. Each section is in a seperate folder detailing the GPS start and end time for that section. Both IPAS and Applanix processing used network adjustment to obtain new basestation co-ordinates which helped minimise combined seperation error.

comment:6 in reply to: ↑ 3 ; follow-up: Changed 14 years ago by jb362

Replying to ella:

There is a gap in one of the flight lines.
Two basestations have been used and two sbets files generated (one for each basestation) because we could not minimise the combined seperation or get a green line for all flight lines.

This is for the Applanix processing. We have also since split the flight line into 3 sections each in their own folders which can be found alongside the two folders mentioned here, in the applanix directory. See comments below...

comment:7 in reply to: ↑ 6 Changed 14 years ago by jb362

Replying to jb362:

Replying to ella:

There is a gap in one of the flight lines.
Two basestations have been used and two sbets files generated (one for each basestation) because we could not minimise the combined seperation or get a green line for all flight lines.

This is for the Applanix processing. We have also since split the flight line into 3 sections each in their own folders which can be found alongside the two folders mentioned here, in the applanix directory. See comments above...

comment:8 Changed 14 years ago by jb362

At the time of unpacking there was no room in the arsf repository so this project has not yet been fast copied there.

comment:9 Changed 14 years ago by jb362

There was an eagle directory here but all files were for 154a London day and the directory has now been deleted. It looks as if there is only LiDAR data here.

comment:10 Changed 14 years ago by benj

  • Description modified (diff)

There is no Eagle or Hawk data recorded on the logsheet, the Eagle data was an unpacking error copying in some from 154a instead. This flight is LiDAR and TABI only.

comment:11 Changed 14 years ago by emca

  • Owner set to emca
  • Status changed from new to assigned

Starting LIDAR processing

comment:12 Changed 14 years ago by jb362

Beginning LiDAR delivery check

comment:13 Changed 14 years ago by jb362

LiDAR delivery check complete. Everything fine, however there is a slight gap between lines 5 and 1 at the bottom of the image, and again between lines 1 and 2 in the same location. Also, flight line 4 is about 1/10th shorter than he other flight lines.

Should Read_Me-20100727.txt not be in .pdf format?

No GB08_19-2010-254b_intensity_vectors.jpg present in delivery directory.

comment:14 Changed 14 years ago by emca

  • Description modified (diff)

Vector data arrived and intensity image with vectors overlaid added to delivery.

LiDAR data dispatched to PI 13/08/2010

comment:15 Changed 13 years ago by emca

  • Component changed from Processing: general to Archiving

LiDAR data has been r-synced

Ready for archiving (unless we need to do something with the TABI data first)

comment:16 Changed 13 years ago by knpa

  • Description modified (diff)

RCD raw files and logs were present in 154a, have moved to correct project.

These may be useless on a night flight and can possibly be deleted.

comment:17 Changed 12 years ago by knpa

  • Description modified (diff)
  • Milestone set to 2010 data processing completion

comment:18 Changed 12 years ago by knpa

  • Owner changed from emca to knpa

Beginning archiving.

Note: See TracTickets for help on using tickets.