Opened 19 months ago

Last modified 14 months ago

#592 new flight processing

GB15/00, flight day 234c/2015, Alconbury

Reported by: lah Owned by:
Priority: immediate Milestone: 2015 data processing completion
Component: Processing: general Keywords:
Cc: Other processors:

Description (last modified by dac)

Data location: ~arsf/arsf_data/2015/flight_data/arsf_internal/GB15_00-2015_234c_Alconbury

Data arrived from ARSF via USB on 27/08/2015.

Scientific objective: Acquisition of data to check potential new location for boresight flights. Processing of RCD data is highest priority. LiDAR should also be processed to check if there are sufficient features to be used for a boresight.

Priority: Unknown

PI: Internal

Flown on same day as Cambridge and Monks Wood(RG13/08).

Sensors:

  • Fenix
  • Leica LIDAR
  • FW Leica LIDAR
  • RCD

Change History (7)

comment:1 Changed 19 months ago by lah

Unpacking

All extra files have been split out except from RCD, which is duplicated for 234a, 234b and 234c. Please only process RCD for one of these projects, then split once processed.

comment:2 Changed 19 months ago by dac

  • Description modified (diff)

comment:3 Changed 15 months ago by gej

Navigation Processing

Gravnav base station values:
longitude: 52 11 07.32947
Latitude: -0 06 44.97118
elevation 120.032m
ant: 1.046m

Complete using IPas TC, position separation and accuracy within acceptable limits.

comment:4 Changed 14 months ago by dac

Fenix Processing

Processed Fenix data to provide up to date imagery of site.

Replaced wavelengths in raw data. Found SCT values:

FlightlineSCT
100.96
111.01
120.98

Haven't created delivery as not required.

comment:5 Changed 14 months ago by dac

Marking Camera, Fenix and LiDAR as finished - only required processing to sufficient level for us to check suitability as a boresight location.

comment:6 Changed 14 months ago by lah

Fenix 2016 calibration test

I have reprocessed (to level 1b only) this data using the new 2016 calibration for comparison purposes. Previous data has been moved to 2015cal folders. New spectra look much better.

comment:7 Changed 14 months ago by lah

Fenix 2015 new wavescale test

I've also used this data to test a new wavescale from the 2015 calibration, improved with additional anchors from the new spectral lines file. Although there is no overlap region, there is still a large spike which is not present in the 2016 calibration. Perhaps the sensor was still unstable from Malaysia at the 2015 calibration?

I've moved the tests into subfolders and the original data back into it's original place now.

Note: See TracTickets for help on using tickets.