Changes between Version 82 and Version 83 of Procedures/EndUserDelivery

Timestamp:

Sep 14, 2009, 12:03:38 PM (15 years ago)

Author:

emca

Comment:

--

Procedures/EndUserDelivery

@@ -123 +123 @@
 You will need to have root permissions before you start ('sudo su' and then type in your password).
 
-To create a partition:[[BR]]
-
-Run dmesg to find device name. Listed at the bottom if just plugged in 
+
+
+Run dmesg to find device name. Listed at the bottom if just plugged in. 
 
 e.g 
+
+{{{
 SELinux: initialized (dev sdb, type ext3), uses xattr
-
-Device path is then dev/sdb
-
-Unmount the disk with umount dev/device_name, e.g. umount dev/sdb
-
-Run fdisk /dev/device name 
+}}}
+
+
+Device path is then /dev/sdb
+
+
+'''Create a partition:[[BR]]'''
+
+Unmount the disk with umount /dev/device_name, e.g. umount /dev/sdb, and plug back in again.
+
+Run fdisk /dev/device_name 
 
 enter 'p' to print partition table and check you have selected the correct disk[[BR]]
 enter 'd' to delete the current partition[[BR]]
 enter 'n' to create a new partition [[BR]]
-enter 'p' to make new partition the primary partition. If it asks you to give a partition number, press 1 then enter twice.[[BR]]
+enter 'p' to make new partition the primary partition. If it asks you to give a partition number press 1 and enter. Then press enter twice.[[BR]]
 enter 'p' to print new partition table – if all seems fine enter 'w' to write
 
-To format the disk:[[BR]]
-
-Ensure disk is unmounted again
+'''Format the disk:[[BR]]'''
+
+Ensure disk is unmounted and plugged back in again. 
 
 To be on the safe side, run dmesg again to make sure device name hasn't changed. You should now see the partition listed as device_name1, e.g. sdb1 
@@ -151 +158 @@
 
 
-Change permissions:[[BR]]
-
-Unplug the disk again and plug back in. 
-
-Make writable for everyone – chmod a+rwx /media/disk 
-
-
-[[BR]]
+'''Change permissions:[[BR]]'''
+
+Unplug the disk again and plug back in. The disk space will be located under /media/disk.
+
+Make writable for everyone using chmod a+rwx /media/disk 
+
+
+
 [[BR]]
 === Copy over your data onto the disk ===
 
-Top directory should be the one with the project code (from within the delivery directory)
+Top directory should be the one with the project code (from within the delivery directory).
 Copy the data to /media/disk.
 
-e.g. cp /users/rsg/arsf/arsf_data/2008/flight_data/vocals/VOC_10-2008_314_Chile/delivery/20090827/VOC10  /media/disk
+e.g. cp /users/rsg/workspace/GB08_08-2009_180b_Wytham_woods/delivery/20090827/GB08-08  /media/disk