Changes between Version 92 and Version 93 of Procedures/NewDataArrival

Timestamp:

Oct 9, 2009, 10:56:05 AM (15 years ago)

Author:

mggr

Comment:

--

Procedures/NewDataArrival

@@ -5 +5 @@
 If in any doubt about something (e.g. a dataset has two project codes), contact Gary.
 
-== Mounting the SATA disk ==
-To mount the SATA disk, put it into the computer. Then ssh onto the machine. Run `dmesg` to show information on the device names, the kind of thing we would be look for is:
-{{{
-mptsas: ioc0: attaching sata device, channel 0, id 1, phy 1
-scsi 0:0:1:0: Direct-Access     ATA      ST3500630AS      E    PQ: 0 ANSI: 5
-sd 0:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
-sd 0:0:1:0: [sdb] Write Protect is off
-sd 0:0:1:0: [sdb] Mode Sense: 73 00 00 08
-sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
-sd 0:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
-sd 0:0:1:0: [sdb] Write Protect is off
-sd 0:0:1:0: [sdb] Mode Sense: 73 00 00 08
-sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
-sdb: sdb1
-}}}
-where the name of the disk is sdb (sata disk b) and the partion is sdb1. SATA disks will be 500GB in size.  If paranoid and want to look at a time stamped version run 
- `sudo less /var/log/messages`. 
+== Copy the data onto the system ==
 
-To mount the disk use command `sudo mount -o ro /dev/sdb1 /mnt/tmp`. This will mount it read only.  Then check the data looks ok.  If it does, remount the disk using `sudo mount -o remount,rw /mnt/tmp` to make it read/write and run the command `chmod a+rX -R /mnt/tmp` to ensure we have full read permission.  Finally, remount the SATA back as read only, `sudo mount -o remount,ro /mnt/tmp`.
-
-== Copy to unpacking ==
-
- * when copying from the source media, preserve timestamps with `cp -a` or `rsync -av`
+ * [wiki:Procedures/NewDataArrival/Disk Data by SATA disk or DVD]
+ * [wiki:Procedures/NewDataArrival/Network Data by network transfer]
 
 == Create entry on flight data status spreadsheet for each project ==