Opened 5 years ago

Last modified 4 years ago

#652 new flight processing

HyTES/19, flight day 168/2019, Grosseto

Reported by: wja Owned by:
Priority: immediate Milestone:
Component: Processing: general Keywords:
Cc: Other processors:

Description (last modified by wja)

Data location: /users/rsg/arsf/arsf_data/2019/flight_data/italy/HyTES19-2019_168_Grosseto

Data arrived from Kings College London via hardisk on July 15 2019.

Scientific objective: Joint NASA and ESA campaign flying JPL’s HyTES thermal instrument over sites in Europe with a focus on crops and soil. Aim is to inform the future Land Surface Temperature Monitoring (LSTM) satellite mission. The NCEO Fenix instrument was flown alongside HyTES to provide visible – SWIR hyperspectral data.

PI: Martin Wooster

Sensors:

Fenix (requested, flown)

Change History (21)

comment:1 Changed 5 years ago by wja

  • Description modified (diff)

comment:2 Changed 5 years ago by wja

Navigation Processing
Basestation data converted to RINEX. Of the three RINEX files (which contain multiple days of data), a file for this date has been created with the following command:

teqc -st 2019_06_17:08:04:13.980 -e 2019_06_17:16:16:02.770 +nav Default_9488_1706_080413.19n Default_9488_0509_114526.m00 > Default_9488_1706_080413.19o

comment:3 Changed 5 years ago by wja

Unpacking
No GPS location for Fenix flightline 1.

comment:4 Changed 5 years ago by wja

Navigation Processing
IPAS SOL file produced using Precision Point Processing using IPASTC.

comment:5 Changed 5 years ago by wja

Navigation Processing
Note that processing has been done on 20190617_083415.dat.*. There is an additional data file (20190617_102656.dat.000) but it does not contain data during the flihgt (start = 10:27, end = 10:34 and last Fenix line was recorded at 9:58).

comment:6 Changed 5 years ago by seg

Fenix Processing
Started. Fenix Nav file not working. Holding for now while waiting for bore-sight

Last edited 5 years ago by seg (previous) (diff)

comment:7 Changed 5 years ago by seg

Logsheet Creation

Log Sheets generated, flight line plot not generated so used flight KML instead.

comment:8 Changed 5 years ago by seg

Fenix Processing

SCT values identified

Flightline FENIX
1 56.30
2 1.85
3 2.55
4 1.42
5 130.39
Last edited 5 years ago by seg (previous) (diff)

comment:9 Changed 5 years ago by dac

Fenix Processing
Looks like one of the lines could have a framerate issue. Need to resolve this before mapping all bands.

comment:10 Changed 5 years ago by wja

Hyperspectral Processing
Issues with flightlines:

  • Line 2 & 3: looks like the wrong FPS was used in the processing.
  • Line 5: Bad SCT - perhaps a FPS issue?

comment:11 Changed 5 years ago by seg

Fenix Processing

Issues with flightlines FPS:

  • Line 2 FPS changed from 31 to 30.944
  • Line 3 FPS changed from 93 to 92.5415
  • Line 5 FPS changed from 93 to 92.715
  • Line 4 FPS Changed from 93 to 92.419
Last edited 5 years ago by seg (previous) (diff)

comment:12 Changed 5 years ago by wja

Delivery Check
Starting delivery check

comment:13 Changed 5 years ago by wja

Delivery Check

  • fodis/ directory needs removing
  • Old files in line_information/, navigation/, need removing. New files need renaming so they don't contain the SCT value in the name.
  • Some of the misnamed BIL files in navigation/ do not have HDRs
  • *.xml is missing in project_information/. Use aplxml.py --meta_type p --project_dir [PATH] --output [PATH] --config_file [PATH] --lev1_dir [PATH] --igm_dir [PATH] to produce it.
  • Remove *aux.xml file in dem/
  • `check_apl_cmd ran through fine. But SCTs (or FPS) look wrong on flightlines 1 & 3 - is it using values before the conversion?

Let me know when this is fixed

comment:14 Changed 5 years ago by seg

Delivery Check

Problems from above comment resolved

comment:15 Changed 5 years ago by wja

Delivery Check
Few minor changes:

  • Table in logsheet with 'Logsheet flightline name' hs the wrong flightline names.
  • Update the data quality text in the ReadMe

comment:16 Changed 5 years ago by wja

Issues resolved
Ready to Deliver

comment:17 Changed 5 years ago by asm

Fenix Delivery

Project delivered, finalised and notification sent to PI on 5th November 2019.

comment:18 Changed 4 years ago by wja

Atmospheric correction
Atmospheric correction has been applied to create level2 and mapped data.

Delivered to PI on June 22nd 2020

Needs archiving at CEDA

comment:19 Changed 4 years ago by wja

Archiving
Starting archiving

comment:20 Changed 4 years ago by wja

Archiving
JSONs created, added to internal database.
Waiting for account with CEDA to be renewed in order to rsync

comment:21 Changed 4 years ago by wja

Archiving
Rsync to CEDA complete. Have sent an e-mail to ask for their confirmation that the data has been received.

Note: See TracTickets for help on using tickets.